website for k6eep
Solar X-rays:    Status            Geomagnetic Field:    Status             From n3kl.org
Contests
Linux
Line
Marote
Rig Control Program for the Elecraft K2
See the screenshot
Program is based on Qt3 and you will need a minimum version of Qt 3.1
Latest version is 3.1 as of 22 Aug 2006 >>>> Marote 3.1 <<<<
This version of Marote has been tested with the following product versions
Elecraft K2 firmware 2.04P
Xlog 1.0
Here are screenshots that show the complete Marote v3.1 GUI
Main Window
Aux Tab
CW Ops tab
Config tab
FastTuna
Command Line Rig Control Program for the Elecraft K2
aka Kookoo. I had to change the name. Old name is still in use for executable.
FastTuna Tarball
CallGit
Callsign lookup tool Screenshot
Looks up callsigns on QRZ.com without having a big web browser up
Latest version is 1.4 >>>> CallGit v1.4 Tarball <<<<
Gentoo Ebuilds
Here are some ebuilds I made for Gentoo users. Put then in a portage overlay directory and emerge them.
Callgit Ebuild callgit-1.1.ebuild
Marote Ebuild marote-3.1.ebuild
Xlog Ebuild xlog-1.3.1.ebuild

News
Line
 (Nov 3 2007) I just updated CallGit to fix a small problem. Version 1.3 works fine now.
Older news...
Ok finally, I have released Marote 3.1. It allows users to select the serial port they want to use by name if needed.
I am also learning how to do Gentoo ebuilds. And I have created several that work great here. Now we just have to wait
for the Gentoo folks to put them on their servers. Easier said than done. They are swamped.
My time is short these days. I have enrolled in night school and I go full time to that for the next year.
So I work all day and go to school all night. Not much time to write software for fun. But I try anyway.
73, Mike

Powermate
Griffin website
Powermate user programs
Check online for instructions to get this working in your specific kernel. It is different.
Page Hits =